Your next Commercial Grinder Built for High-Volume Pre-Roll Production
Is your pre-roll line is still leaning on hand grinders? or countertop units?, uneven texture and slow material prep are likely holding back your whole production floor. The King Shred by King Kone is a commercial-grade grinder designed specifically for operators who need consistent, fluff-ready material before it ever reaches filling, metering, packing, and finishing.
Why Material Prep Makes or Breaks Production
Material preparation is the first domino in the production line. Uneven texture leads to loose packs and inconsistent burns, excess dust clogs trays and machines, and manual grinding simply cannot keep pace with real commercial volume. King Shred addresses each of these pain points with a purpose-built, motorized design instead of a modified consumer grinder.
Serious Power, Built to Last
King Shred runs on a heavy-duty ½ HP motor delivering 50 lb-ft of torque, giving it enough force to move through sticky, dense, dry, or compact material without stalling or slowing down — something hand grinders and small units struggle with under commercial loads.
One Pound in Under Two Minutes
Operators can drop in up to a pound of material and get a full, consistent grind in 90 seconds or less. King Kone's published guidance rates the machine at 45–65 pounds per hour depending on material type and desired consistency, making it suitable for genuine production-scale throughput.
Clean, Fluffy Results With No-Mess Maintenance
The motorized hopper feeds material automatically, so operators aren't stuck babysitting the machine or clearing clumps mid-run. It's designed to minimize dust and clumping so output stays fluffy and even, and the hopper breaks down easily for quick cleanup between batches.
Built for the Complete King Kone Production Workflow
King Shred is designed to plug into a larger commercial workflow. It pairs with the King Kone Pre-Roll Filling Machine, Cone Metering Trays, Packing Fingers, and the Dutch Crown Closer Collection, so operators can move from raw material to finished, packed pre-rolls using one connected system.
King Shred Specifications at a Glance
Motor: heavy-duty ½ HP. Torque: 50 lb-ft. Power: standard 110V outlet. Throughput: 45–65 lbs/hour (official King Kone rating). Batch size: up to 1 lb per 90-second cycle. Dimensions: 16"W x 12"D x 13.75"H. Grind setting: one consistent grind size. Available colors: Black, Red, Blue, Green, Pink. Price: $3,400.00.
Who Should Buy the King Shred Grinder
King Shred is built for commercial pre-roll operators who need repeatable material prep at scale for teams outgrowing hand grinders to larger operations looking to reduce labor hours and tighten fill-weight consistency across a production run.