Filling
King Kone V2
Single-operator, 169-position filling platform. The included two-tray set supports 84mm, 98mm, and 109mm cones.
View the V2→King Kone commercial production systems
Prepare. Fill. Finish.
Build a matched pre-roll workflow around the current King Kone V2, motorized King Shred material preparation, size-specific cone and tube components, King Stax loading systems, and the manual Dutch Crown Closer.
169Standard cone positions
84 / 98 / 109mmIncluded standard cone sizes
9–14mmOptional tube insert range
70–109mmCloser receiving trays
Core machinery
Each machine supports a different stage. King Shred prepares material, the current V2 fills compatible cones or optional tube setups, and the Dutch Crown Closer finishes supported cone sizes with interchangeable receiving trays.
Preparation
King Shred
Motorized ½-horsepower grinder with 50 lb-ft of published torque and approximately 45–65 pounds per hour of manufacturer-published throughput.
View King Shred→
Finishing
Dutch Crown Closer
Manual finishing system with interchangeable receiving trays for 70mm, 84mm, 98mm, and 109mm cones.
View the closer→Choose the format before the accessory.
Every compatible component is tied to a production format. Keep the machine generation, position count, cone length or tube diameter, target fill, packing tool, and receiving tray aligned.
01 / STANDARD CONES84mm, 98mm, 109mm
The current V2 includes the two-tray system for these standard cone sizes.
02 / SPECIALTY CONES60mm, 70mm, 98mm Slim
Optional trays extend the V2 to mini, dog-walker, and slim formats.
03 / STRAIGHT TUBES9mm through 14mm
The separate 115-tube conversion base uses diameter-specific inserts.
04 / FINISHING70mm through 109mm
The manual closer changes format through its receiving tray.
Build a complete setup
Use bundles for a matched starting point, or shop individual trays and tools when expanding an existing verified machine.
Size-specific bundles
Cone bundles cover 60mm, 70mm, 84mm, 98mm, and 109mm formats. Tube bundles cover 9mm through 14mm setups with the compatible conversion components.
Shop bundlesTrays and production parts
Shop cone trays, tube inserts, volumetric metering trays, packing fingers, clearing tools, and closer receiving trays with accurate format guidance.
Shop partsSreamInc is an independent authorized retailer and is not King Kone USA. Manufacturer-published output depends on material, staffing, setup, maintenance, and operator technique. Confirm compatibility before ordering replacement or expansion parts.